Effectiveness of (R,Q) policies in one‐warehouse multiretailer systems with deterministic demand and backlogging

Consider a distribution system with a central warehouse and multiple retailers. Customer demand arrives at each of the retailers continuously at a constant rate. The retailers replenish their inventories from the warehouse which in turn orders from an outside supplier with unlimited stock. There are economies of scale in replenishing the inventories at both the warehouse and the retail level. Stockouts at the retailers are backlogged. The system incurs holding and backorder costs. The objective is to minimize the long‐run average total cost in the system. This paper studies the cost effectiveness of (R, Q) policies in the above system. Under an (R, Q) policy, each facility orders a fixed quantity Q from its supplier every time its inventory position reaches a reorder point R. It is shown that (R, Q) policies are at least 76% effective. Numerical examples are provided to further illustrate the cost effectiveness of (R, Q) policies. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 422–439, 2000     

Optimal policies for M/M/m queue with two different kinds of (N,T)‐policies

In this paper, two different kinds of (N, T)‐policies for an M/M/m queueing system are studied. The system operates only intermittently and is shut down when no customers are present any more. A fixed setup cost of K > 0 is incurred each time the system is reopened. Also, a holding cost of h > 0 per unit time is incurred for each customer present. The two (N, T)‐policies studied for this queueing system with cost structures are as follows: (1) The system is reactivated as soon as N customers are present or the waiting time of the leading customer reaches a predefined time T, and (2) the system is reactivated as soon as N customers are present or the time units after the end of the last busy period reaches a predefined time T. The equations satisfied by the optimal policy (N*, T*) for minimizing the long‐run average cost per unit time in both cases are obtained. Particularly, we obtain the explicit optimal joint policy (N*, T*) and optimal objective value for the case of a single server, the explicit optimal policy N* and optimal objective value for the case of multiple servers when only predefined customers number N is measured, and the explicit optimal policy T* and optimal objective value for the case of multiple servers when only predefined time units T is measured, respectively. These results partly extend (1) the classic N or T policy to a more practical (N, T)‐policy and (2) the conclusions obtained for single server system to a system consisting of m (m ≥ 1) servers. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 240–258, 2000     

液体火箭发动机气液同轴式喷嘴混合特性实验研究

本文通过实验研究了液体火箭发动机气液同轴离心式喷嘴的混合特性。利用两相探针技术,测量了喷嘴下游喷雾流场中气液流强和混合比分布,考察了喷嘴缩进比和气液喷注压降等参数对混合特性的影响。结果表明,气液同轴离心式喷嘴的缩进比对喷嘴混合特性有较大影响,增大缩进比将导致更窄的气液流强分布和更均匀的混合,而改变气液喷注压降将导致不同的流强和混合比分布规律。     

电扫偶极子相控阵天线的空域极化特性分析

推导了偶极子线性阵列和平面相控阵天线在空域波束电扫时辐射场的极化特性,建立了数学模型。计算结果和仿真分析表明:偶极子相控阵天线辐射场在空域扫描各个波位的极化特性并不一致,是具有一定差异的,当待测目标的方向偏离天线电轴方向时,所接收到的电波极化状态也会随偏离电轴的方向和仰角而改变。该结论对于现代电子战中相控阵天线系统的精确建模与仿真具有重要意义,对于研究和利用天线的极化特性进行雷达极化抗干扰技术是非常必要的。     

论社会主义核心价值体系的理论特征及其价值本质

社会主义核心价值体系在理论特征上深刻体现了社会主义本质，这必然在价值关系中为理解社会主义核心价值体系的价值本质奠定了基础。社会主义核心价值体系的价值本质不仅是一种真实的主客体关系，也是一种具有教育属性的价值旨趣与具有优先选择的公共价值。     

反电动势对无扰载荷航天器精确定向的影响

无扰载荷航天器中非接触式作动器反电动势会引起有效载荷模块与支持模块之间的耦合，影响有效载荷模块的精确定向性能。通过建立无扰载荷航天器的耦合动力学模型，分析非接触式作动器反电动势对有效载荷模块精确定向性能的影响。考虑六支杆立方构型无扰载荷接口，结合拉格朗日方程和牛顿欧拉方法建立有效载荷模块平台动力学模型。推导非接触式作动器的输出力模型，并引入有效载荷模块平台动力学模型，给出考虑非接触式作动器反电动势的耦合动力学模型。将支持模块上飞轮动静不平衡引起的谐振作为干扰力矩，建立了无扰载荷航天器在轨定向状态的Simulink仿真模型。仿真结果表明，反电动势系数越大，干扰力矩对有效载荷模块的影响越大，有效载荷模块精确定向精度越低。     

固定翼反潜巡逻机作战效能评估

运用改进的Topsis评估模型对反潜巡逻机的作战效能进行评估,主要是对指标权重的计算方法进行改进:综合考虑客观熵权和专家主观权重得到综合权重,通过客观的熵权信息来调整主观权重的偏差,使得反潜巡逻机作战效能的评价结果更为合理。实例分析表明,该方法能够主客观相结合,简单有效,具有一定的推广应用价值。     

对接组合体初始姿态影响的建模研究

建立了对接过程对组合体初始姿态影响的解析与数值模型。解析模型采用相对于整体质心的动量矩定理,给出了对接完成后组合体姿态角速度计算的解析表达式。结合追踪器的绝对运动方程和目标器的相对运动方程,建立了基于对接动力学的数值模型。通过单一偏差和组合偏差两种算例,对解析和数值模型得到的组合体初始姿态角速度进行了对比分析。计算结果表明,两种模型绝对偏差在0.07°/s以内,相对偏差在10%以内,另外给出了两种模型在工程任务中各自的适用阶段。     

用动网格法计算理想平板的颤振导数

提出了一种数值模拟振动的理想平板绕流场 ,并提取其气动导数的方法。时间相关的不可压N S方程采用Projetion 2格式解耦 ,关于中间速度的动量方程的时间和空间离散采用二阶半隐格式 ,压力Possion方程迭代用多层网格法加速收敛。分别计算平板作竖向强迫振动或扭转强迫振动的气动力 ,用动网格法考虑平板和气流的耦合作用。由计算得到的气动力用最小二乘法确定 8个气动导数。计算结果和理想平板的Theodorsen理论值有较好的一致性